This post contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you. Read our disclosure.
Key takeaways
- Measure the widest spread of the stand legs first, then add a few inches, before buying any cover.
- A collar, basket or bucket takes less floor than a skirt and is easy to store flat or nested.
- For a tabletop tree, a tray, small basket or pot cover is enough.
- Keep the light cord out of the way: route it behind the cover and not under a rug.
In this post13 sections
Disclosure: some links below are Amazon search links, and we may earn a small commission if you buy. It costs you nothing, and we have not tested these products hands-on.
Measure your tree stand first
Most tree skirts are 36 to 56 inches wide, which is a lot of floor in a studio. Whichever alternative you choose, start with the stand. Measure from the tip of one leg to the tip of the opposite leg, then add 4 to 6 inches so the cover clears the legs.
| Tree height | Typical stand spread | Cover width to look for |
|---|---|---|
| Tabletop (2 to 3 ft) | 6 to 10 in | 10 to 14 in |
| 4 to 5 ft | 14 to 18 in | 18 to 22 in |
| 6 ft | 18 to 24 in | 22 to 28 in |
| 7 ft and up | 22 to 30 in | 26 to 34 in |
Check the stand, not the tree: stand legs vary a lot between brands, so the numbers above are a starting range only.
9 christmas tree skirt alternatives that save floor space
1A tree collar
A collar wraps the stand in a ring of metal or wicker, so the base looks clean and takes up only the size of the stand. It is the most direct swap for a skirt, and many fold or nest for storage.
- Measure the stand spread before ordering.
- Choose a collar a few inches taller than the stand.
Closest swap for a skirt, with a smaller footprint.
2A woven basket
A large woven basket hides the stand and adds texture. It works on the floor for a slim tree or on a console for a tabletop tree.
- Cut a hole in the back of the basket for the light cord if needed.
- Weigh down a tabletop tree with a flat stone or a brick under the stand.
Works year-round as laundry or blanket storage.
3A wood crate
A small wooden crate turns the base into a storage spot. A folded blanket inside it hides the stand and gives you a place for the throw once the holiday is over.
- Choose a crate with open slats for the cord to pass through.
- Pad the bottom with a felt pad so it does not scratch the floor.
Doubles as year-round storage.
4A knit throw blanket
A thick knit throw coiled into a ring is the lowest-cost swap. It softens the base and goes back on the sofa after the holiday.
- Tuck the end under to stop it from unrolling.
- Keep the cord off the blanket and away from pets that chew.
Used on the sofa the rest of the year.
5A round wood tray
On a small table, a round tray catches drips and ornaments and makes the base look styled. It suits tabletop trees up to 3 feet.
- Choose a tray with a low rim so the stand sits flat.
- Add a few loose ornaments or pinecones around the base.
Doubles as a serving tray on Christmas Eve.
6Wrapped gift boxes
Stack empty wrapped boxes around the stand and nobody sees the legs. This is the cheapest option and it makes a small tree look fuller.
- Use empty boxes in different sizes so the gifts do not slide.
- Leave real gifts out until Christmas Eve.
Nests for storage and reusable each year.
7A galvanized bucket
A metal bucket gives a farmhouse look and keeps the stand upright. Pick one tall enough to cover the stand and add a layer of burlap or a linen wrap.
- Fill the bottom with a few bricks or a weight to steady the tree.
- Wrap the rim in a strip of burlap if the metal is sharp.
Used for plants or ice the rest of the year.
8A jute rug or mat
A round jute mat defines the tree zone and protects the floor. Pair it with a collar or basket for a full look, and it also works as a base for hosting guests.
- Pick a size 6 to 12 inches wider than the cover.
- Tape or use a rug grip so the edge does not curl.
Protects hardwood floors from scratches.
9A ceramic pot cover
For a bedroom or desk tree, a ceramic cachepot hides a small stand in one step. Choose a plain white or neutral color to match your room.
- Check that the pot has a hole or a saucer so water does not leak.
- Add a small felt pad so it does not scratch the dresser.
Reused for a houseplant after the holiday.
How to choose
What we like
- Measure the stand spread and add 4 to 6 inches
- Pick something you can reuse after the holiday
- Choose a cover that nests or folds for storage
- Route the light cord behind the cover
- Match the cover to your floor and your color palette
Keep in mind
- Buying a skirt without measuring the stand
- Covers that block the cord or the outlet
- Open flames or candles near a basket or blanket
- Heavy ceramic on a wobbly table
- Rugs without a grip that slide under the stand
Lights next to the base? See our chart for how many lights for a Christmas tree and our small Christmas tree ideas for tables and tiny corners.
Not sure where the tree goes? Our guide to where to put a Christmas tree in a small living room helps you pick a spot before you pick the base.
Frequently asked questions
What can I use instead of a Christmas tree skirt?
A tree collar, a large basket, a wooden crate, a chunky knit throw, stacked wrapped boxes or a galvanized bucket all work. Choose one that fits your stand.
How do I measure for a tree collar?
Measure from the tip of one stand leg to the tip of the opposite leg, then add 4 to 6 inches so the collar clears the legs.
What can I use for a tabletop tree base?
A round wood tray, a small basket or a ceramic pot cover works well for trees up to 3 feet.
How do I hide the tree stand without a skirt?
Cover it with a basket, collar or wrapped boxes. Keep the light cord running behind the cover to an outlet.
Is a tree collar better than a skirt in a small space?
Often, yes. A collar takes up only the size of the stand, while a skirt spreads 3 feet or more across the floor.

Save it for later
Pin this to your Seasonal Decor board so it's there when you need it.
Save to Pinterest





